Monitor of underfloor heating mat(Malfunction detector)
The heating elements are tough, but they could be damaged on the
jobsite. We recommend the screamer to monitor your mats during
every installation step. The screamer will immediately warn you in
the event of damage. If the alarm sounds, stop work and check
operation step in the installation manual.
Installation monitor
Easy to install monitoring tracking project.
The screamer will immediately warn you in the event of damage.
If the alarm sounds, stop working and check troubleshooting page in
the installation manual.
For floor heating cable heating cable damage monitor,
element tester cable tester for under floor heating screamer
The heating elements are tough, but they could be damaged on the
jobsite.
The installation monitor will immediately warn you in the event of
damage.
If the alarm sounds, stop work and check operation step in the
installation manual.
Techical Data Requires
9V batteries(included)
Packing Details
1pc/inner box, 85pcs/carton
Carton size: 51*21*36cm
Cautions
* Floor warming lead wires should also be tested with an Ohm meter
for more specific readings.
* Under no circumstances should the installation monitor be
connected to a live electrical current.
Please note: for added protection, we recommend all mats be tested
with an Ohm's meter for more specific readings. and on completion
of the floor finish with an insulation (Megger) tester set @500v.
The insulation reading must be between infinity and 1MOhm.
Package
1pc/inner box, 85pcs/carton
Carton size: 510mm*210mm*360mm
