Large Display Remote Control Digital Room Thermostat for Fan Coil
Unit
The SK306L thermostat is a stand-alone microprocessor based
thermostat with LCD display .
The thermostats are designed to control room temperature by way of
on/off controlling the fan coil units, air damper or electric
heaters in heating, cooling and ventilation applications.
Technical Data
| Set TEMP range | 5-35 ºC | Power supply | 220VAC±10%,50/60Hz |
| Accuracy | ±1ºC | Rated current | Max resistive current 3A |
| Sensor Type | NTC sensor | Power consumption | <2W |
| Ambient Condition | -5-55 ºC | Operating Humidity | 5~90%RH (no condensing) |
| Color | White | Protection Class | IP20 |
| Housing Material | PC+ABS Flame Retardant plastics | Dimension | 86*86*14mm |
| Certificate | CE & ISO9001 | Hole pitch | 60mm (standard) |
To turn the thermostat on/off
1. The power on and off of the thermostat can be realized through
manual operation.
The power on/off condition can be switched through press on/off
button.
2. The primary power up of the system is under the power off
condition.
To adjust thermostat temperature
1. Press △ or ▽ to adjust the temperature, the flashing default
temperature is 20ºC;
2. Press △ to increase temperature by 1ºC;
3. Press ▽ to decrease temperature by 1ºC;
4. The system will exit automatically without any operation in 5
seconds.
Temperature calibration
When the thermostat is in stand by state, press "" for 3 seconds,
while display "XX" ºC (RT symbol doesn't show), press "up" or
"down" key to adjust the temperature to the correct value, it will
accept automatically in 5 seconds.
Heating/Cooling setting
Press "M" key to select heating or cooling mode.
Fan speed setting
With each press of the "fan speed key", the thermostat will change
the speed among low, medium, high and auto speed. In Auto" mode,
the speed automatically change according to the difference between
room temp. and set temp.
